AeroFloss Pro® User Manual
Your complete guide to revolutionary sonic interdental cleaning
Table of Contents
Welcome to the Future of Flossing
Thank you for choosing the Smile-O AeroFloss Pro®. This revolutionary sonic electric flosser transforms your oral care routine with precision engineering and 60-second complete cleaning.
What Makes AeroFloss Pro Different
- Sonic vibrations (32,000–38,000 strokes per minute)
- Three intelligent cleaning modes
- 60-day battery life on single charge
- IPX7 waterproof rating
- Precision interdental tip technology
- Wireless magnetic charging
Technical Specifications
Important Safety Information
⚠️ Read Before Use
- Users with orthodontics, dental implants, or repairs should consult their dentist before use
- Pacemaker users must consult their doctor before use
- Designed for interdental cleaning only — discontinue use if you experience pain
- Not suitable for children or individuals with mental health conditions without supervision
- Never immerse the charging base in water or use in wet environments
- Keep away from open flames and high temperatures
- Do not use while bathing — steam can cause short circuits
- For personal use only — do not share between multiple users
- Store in a dry, ventilated environment away from direct sunlight
- Do not modify, disassemble, or attempt to repair yourself
- If the device has been dropped or knocked hard, stop using immediately and contact us for inspection
- Before charging, ensure your local power supply voltage matches the voltage indicated on the product
🚫 Electrical Hazard
- Do not reach for the charging base if it has fallen into water — risk of electrocution
- Never wash the charging base or submerge it under any circumstances
Interdental Tips
✦ What's Included
Your AeroFloss Pro® comes with 15 interdental tips — approximately one month of optimal hygiene when replaced every 2 days as recommended by dental professionals.
Usage & Replacement
- Soak the tip briefly in water before first use and before inserting into the device
- Gently slot the tip between teeth — do not force or jam it into the gap
- Let the sonic vibrations do the work; no pushing or scrubbing needed
- Replace your tip every 2 days or sooner if bristles show wear
- A fresh tip ensures maximum cleaning effectiveness and hygiene
When your tips run low, replacement packs are available at smile-o.net
Getting Started
- Prepare the tip: Soak your chosen interdental tip briefly in water, then slide it securely into the head piece until it clicks.
- Power on: Press the power button to start the flosser. The LED will indicate which mode is selected.
- Begin cleaning: Gently slot the tip between teeth at the gum line — do not force. The flosser will automatically guide you with 30-second pulses to prompt you to move to the next area.
- Complete routine: Move systematically between all teeth. The device automatically shuts off after 2 minutes for optimal cleaning time. If you need to continue, press the power button again to restart.
- Remove safely: Before removing the flosser from your mouth, press the power button to turn it off first. This prevents water and residue from spattering.
- Clean up: Rinse the tip with clean water and wipe the device with a dry cloth after each use.
Step By Step - Insert Tip
Step By Step - Remove Tip

Pro Tips for Best Results
- Replace interdental tips every 2 days as recommended by dental professionals
- Start with White Light mode if you have sensitive gums
- Use gentle pressure — let the sonic vibrations do the work
- Always wipe the metal end of the device dry after use to prevent rust
⚠️ Nickel-Metal Component Notice
The base of this device contains nickel-metal components. Long-term contact with toothpaste and salt residue can cause rusting over time. Always wipe the metal end dry with a cloth after each use.
Three Intelligent Cleaning Modes
Press the power button to cycle between modes.
Battery & Charging
Battery Status Indicators
Battery Performance
- 45–60 days of use per charge (based on 2 minutes, twice daily)
- 2–3 hours for complete charge via USB magnetic charging
- Use only certified charging adapters for safety
- Charge immediately when red light appears to prevent battery damage
- First charge may vary due to natural discharge during storage
- Only charge in dry environments — never in a bathroom or near water
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| Weak vibration | Low battery | Charge for at least 2 hours |
| Weak vibration | Device dropped or knocked — motor may have shifted | Remove tip, reinsert properly, then test. If persists, contact us |
| Still weak after charging | Battery capacity depleted | Contact manufacturer for repair service |
| Device not working | New device or long storage | Charge for approximately 2 hours |
| Unusual tip noise | Incorrectly assembled tip | Remove and reinsert tip firmly until it clicks |
| Won't charge | Not positioned correctly | Place vertically on base and confirm indicator light is on |
| Charging issues | Dirty contacts | Clean bottom contacts on device and charger, then try again |
Care & Maintenance
Keep Your AeroFloss Pro Performing Like New
- Wipe nickel-metal components with a dry cloth after every use to prevent rust
- Never wash the charging base or submerge it in water
- Replace interdental tips every 2 days for optimal hygiene
- Store in the original case when travelling to protect components
- Avoid extreme temperatures and direct sunlight
- Check for damage before each use — discontinue if damaged
Regulatory & Compliance
Do not dispose of this product in general household waste. Return to an authorised collection point for recycling of electrical and electronic equipment.
Nebula Health Holdings Limited
71–75 Shelton Street, Covent Garden
London, United Kingdom, WC2H 9JQ
hello@smile-o.co
George Penrock
Elielinaukio 2, 00100
Helsinki, Finland
+44 0788 886 7132
Nebula Health Holdings Limited
71–75 Shelton Street, Covent Garden
London, United Kingdom, WC2H 9JQ
EU and UK Declarations of Conformity are available upon request at support@smile-o.net
